Exterior wall waterborne paint, refined by the modified acrylic
emulsion andimported titanium dioxide, it's the most economical and
decorative material for decoration and wall renovation, apply to
the surface decoration and protection of outdoor masonry, cement,
1,Easy construction, High brushing area, cost-effective；
2,Antipollution excellent performance, strong anti-acid-base and
3,Good hiding power and adhesion.
Construction tool: Brush,Roller,Spray gun; a suggestion of using
wool brush, short-haired roller, high-pressure airless spray gun.
Paint Coverage:12-14㎡/Kg/single pass(30microns DFT).Paint
consumption varies according to the surface condition of
application and proportion of dilution.
Paint mixing: Mixed uniformity to improve ease of application, must
not exceed 20% by using clean water. If using non-gas spray, no
more than 10%.
Substrate treatment: Surface should be clean, dry and stable,
moisture <10%, pH<10. Remove unstable old film by high
pressure wash or scraper, whichever is appropriate, and then
Application Condition: The temperature at 5-35℃, relative moisture
greater less than 85%; to prevent excessive drying in summer and
prohibit baking in winter, closing windows in sand-dust weather.
Full/Curing Time(30microns DFT at 25-30℃) :
●Surface Dry: 30min ●Hard Dry: 60min●Recoating: interval at least
Cleanout: Clean all the tools with water timely when stopping paint
on its way or completing the coating process.
Storage and Shelf life: Store in a tightly sealed container, cool
and dry place at 5-35℃, 12 months.