Waterborne floor topcoat is refined by the imported resin through
special techniques, suitable for dust-free,clean, wear-resistant,
highly decorated place such as workshops,warehouses and underground
garage class place of the food,textile,machinery
manufacturing,electrical equipment, It includes floor primer,
colorful floor topcoat and intermediate coating.
1,Non-toxic,tasteless,non-combustible,no explosion,no benzene;
2,Resistance to moisture:construction in the dark and wet ground
(without water),strong adhesion,good water resistance of paint
3,High wear resistance,impact resistance:match the different
molecular weight resin to control crosslinking density,tough film;
5,Resistance to oil,acids and bases.
Brush,roller,spray.Mix the main agent and curing agent evenly by
the ratio before painting,mixing time:3-5minutes;Add water
according to construction viscosity,stirring it to ensure paint
Remove primary surface dust,sand,oil,ponding and other possible
effects of attachments before construction.
The mixed paint should be used within the specified time(see
product description).Gel paint cannot be used.
Spray topcoat and intermediate coating after the primer fully dry.
Maintain good ventilation while painting. Do not paint at ambient
temperatures below 10℃ or humidity greater than under 70%
Don't mix it with other paint and organic solvents.
Wash all the tools with water immediately after painting to avoid
hardening.The remaining paint which is not mixed should be
sealed.If there is dry skin,filter it with 100 mesh screen before
Storage: In 5-35℃ cool and dry environment airtight seal.Production
date and expiry date,please refer to the drum label.